1. Ford F Super Interface Scanner Software Download
  2. Ford F Super Scanner Software Download
Ford

What is FORScan?

FORScan is a software scanner for Ford, Mazda, Lincoln and Mercury vehicles, designed to work over ELM327 and J2534 Pass-Thru compatible adapters

There are many OBD2 scanners, but does the FORScan somehow differ? Yes, because it is designed especially for Ford, Mazda, Lincoln and Mercury vehicles. So supports specific features of the manufacturer protocols, making the FORScan more powerful in work with these models than any regular OBD2 scanner.

For example, FORScan can detect modules which are not visible for regular OBD2 scanners, can show you trouble codes which are never displayed by OBD2 scanners, can show you PIDs which are not supported by any OBD2 scanner, run specific tests and service procedures. In other words, FORScan can do things that regular OBD2 scanners can not do.

Main features

  • Detect vehicle on-board network configuration
  • All GASOLINE vehicle since 2001 and DIESEL vehicle since 2004 are COMPATIBLE even if they are not in the list. Find a vehicle make rapidly by using the search function in your web browser (CTRL + F) and for more details about the meaning of modes, check out our page OBD modes & PID. 1x Total Car Diagnostics genuine ELM327 chip - FORD USB Scanner. (Software is not included. That's up to you to get separately. For Windows, we recommend TOAD software). We're 100% confident that our ELM327 Ford USB scan tool device is going to work on your car.

  • Read and reset Diagnostic Trouble Codes from all modules (see list of supported modules)
  • Reading of modules' sensors' data
  • Run test diagnostic procedures (not supported in FORScan Lite yet)
  • Run service procedures (not supported in FORScan Lite yet)

    Supported vehicles:

    All Ford, Mazda, Lincoln, Mercury vehicles that can be addressed by supported adapters. It is 99% of models after 2000 and around 92% of models after 1996 (the year when OBD2 became a standart in USA).

    Supported adapters :

  • ELM327-compatible (fully compatible with original ELM327, such as VeePeak, please also see important note below)
  • J2534 Pass-Thru
  • CANtieCAR (in 'FORScan' mode)
  • OBDLink SX/LX/MX (STN chip)
  • ELS27 (STN1170/2170)

    Important note: almost all of adapters sold under 'ELM327' label are 'clones' (use not original ELM327 chip). In past few years 80% of them are 'bad' clones, and unfortunately this ratio grows. 'Bad' clones are not fully compatible with original ELM327 and will not work with FORScan. FORScan uses service level protocols and requires adapters that are fully compatible with original ELM327. Other software that uses standard OBDII protocol usually work with these adapters, so people usually don't understand the problem. The problem is that service protocols are more complex than regular OBDII ones and this is why it is physically impossible to make FORScan work using these devices. We recommend to obtain either original white-label adapters listed above (Scantool OBDLink, ELS27), or look for ELM327 marked as 'Ford Mazda FORScan' etc compatible - these are usually 'good' clones equipped with HS/MS CAN switch. But 'good' clones may have other problems (for example, USB adapters cannot work faster than on 38400 bps, CAN bus errors etc).

    Supported protocols and bus:

  • FORD HS CAN
  • FORD MS CAN (only for J2534-2, CANtieCAR, OBDLink MX, ELS27 or modified ELM327)
  • FORD SCP
  • FORD 9141
  • FORD UBP (only for Ford VCMII)

    Ford F Super Interface Scanner Software Download

    Supported modules:

    Ford F Super Scanner Software Download

    Almost all of modules availabe through supported protocols. Full list is here.

    Supported platforms:

  • Windows 2000/XP/Vista/7/8/8.1/10 (COM, USB, Bluetooth and WiFi adapters)
  • iOS v7.0 and higher (WiFi adapters, OBDLink MX+, Kiwi 3 BLE)
  • Android v4.0 and higher (Bluetooth and WiFi adapters) Ford

    Platforms in development:

  • Windows Phone 8 (Bluetooth and WiFi adapters) - development stopped.
  • For Ford Scanner USB Scan Tool F-Super Scanner interface
    For Ford-SCANNER is fully for FORD compliant PC-based scan tool designed to use through USB port connection. F-Super Scanner interface also display all the manufacturer specific sensor data.
    F-Super Scanner Function:
    1 Display all the manufacturer specific sensor data in real-time.
    2 Modules access: PCM, TCM, ABS, Airbag, Cluster
    3 Processor: 90c2610 Protocols: FORD (SCP), FORD (ISO9141).
    4 Read and clear manufacturer specific trouble codes (displayed with fault description).
    5 Live Date - Read all the manufacturer specific sensor data in real time.
    6 Connects to Control Unit.
    7 Access to different control units including, Engine, Transmission, Airbag, ABS, Battery Voltage.
    8 Read and Program ICU Injector.
    F-SUPER Interface Ford Scanner Supported Protocols:
    FORD ISO9141
    FORD SCP (Standard Corporate Protocol SAE J1850-PWM)
    FORD CAN (Controller Area Network CAN ISO11898, SAE J2282)
    For Ford Scan Tool Vehicle List:
    1)Diesel Engine
    Fusion 1.4TDCI, Fiesta 1.4TDCI, Focus 1.6TDCI, Focus 1.8TDCI, Focus cmax 1.6TDCI, Transit, Transit connect 1.8TDCI, Mondeo 2.0 TDCI
    2)Gasoline Engine
    KA 1.3i, Fiesta 1.4i 1.6i, Fusion 1.4i 1.6i, Focus 1.6i, Focus cmax 1.6i, Focus vct 1.6i, Focus cmax vct 1.6i, Focus ghia 1.6i, Mondeo 2.0i
    For Ford Scanner Package list:
    1pc x for Ford USB scanner
    1pc x CD drive